Komet Resources complete their drill program at their Kabaya project in Mali

image_pdfimage_print

Komet Resources Inc. {TSX.V: KMT} has completed its drill program on the Kabaya zone on the Dabia South permit (previously known as Moussala) in Mali.

Fifty-three holes of reverse circulation (RC) drilling were completed for a total of 4,243 metres.

 

 

.

 

 

.

2017-08-23 10:56 ET – News Release

Mr. Andre Gagne reports

.

KOMET — END OF DRILLING CAMPAIGN ON KABAYA IN MALI

.

Komet Resources Inc. {TSX.V: KMT} has completed its drilling program on the Kabaya zone on the Dabia South permit (previously known as Moussala) in Mali. Fifty-three holes of reverse circulation (RC) drilling were completed for a total of 4,243 metres, and 4,233 samples were analysed in addition to 248 blanks, 249 standards and 249 duplicates.

.

The Dabia South permit is located in the Senegalo-Malian shear zone which is already host to several important gold deposits such as Fekola (5M ounces) located at only 20 km to the west and Loulo (12M ounces) at 50 km north.

.

The Kabaya zone is oriented north-south and is traced over a strike length of 500 m, a width of 230 m and a depth of 80 m. Furthermore, with the addition of the last results, the south-west extension is traced over a length of 200 m and a width of 50 m, also with a depth of 80 m.

.

The gold-rich zone is open in all directions except towards the north where it may be shifted eastwardly according to an apparent pattern on surface which seems to move mineralised sections between 25 and 30 meters to the east progressing to the north.

.

Following the verification of the analyzed results, of the mineralogy and of the density of material, Komet will prepare a preliminary resource calculation of the near-surface portion of the Kabaya zone and a NI43-101 compliant report.

.

Map of Simplified geology of the Senegalo-Malian Shear zone and location of the permit are available at the following link: http://media3.marketwire.com/docs/1264_1.jpg

 

Mr. Andre Gagne, president and CEO, stated: “With the quality of those results, the future perspectives of our Dabia South permit are becoming more and more interesting. Consequently, we will accelerate the setup of the next drilling campaign.”

.

Samples were analysed by fire assay with AA finish on 50 g sample aliquots at the SGS Laboratory in Bamako, Mali. Drilling supervision and sampling at the drill site were performed by qualified technical staff. The QA/QC program and the processing of results were designed by qualified geologists according to NI 43-101 regulation standards and best industry practices. One blank or standard or duplicate sample was inserted for every 20 samples analysed.

Jacques Marchand, P.Eng. P.Geo., is the Qualified Person who has reviewed this news release and is responsible for the technical information presented herein.

We seek Safe Harbor.